六月 2016-eobdtool.co.uk

2016年6月15日星期三

Kess V2 Error: EXTERNAL EXCEPION EEFFACE or “no protocol found" after format the SD card

Kess V2 (SE87-D) Error: EXTERNAL EXCEPION EEFFACE or “no protocol found" after format the SD card

Error: EXTERNAL EXCEPION EEFFACE

Solution:

Download file "Driver_USBDEVICEDRV.zip" I uploaded at mega.nz and then setup, usually the problem will be fixed

https://mega.nz/#!FEBHRRjS!KApCf3gl3RSOoSxPvy7ZcDpcciAFtSSxtMFw0chuZUU

Note: This file is safe to download.

A little percent of users may have no luck, then download one more fixup software "kess v2 fixusb (se87-d) " and then setup.

https://mega.nz/#!oVRG1YLZ!hABNRfbSXgd-EexPCKX6nWPv1_cNgarQINU9i3n_Q5s

Setup Tips (Important):

If Kess v2 fw4.036 v2.22 is not working, you are strongly advised to install our supplied working Setup 1.93 selfinstall.rar”, if you keep on installing the higher version of software, just copy the program you installed on C:/ and save, then install “Setup 1.93 selfinstall.rar” , finally replace the same file in Local disk C: with the newly saved data; then it will work

Get error “no protocol found" after format the SD card

Usually, some users may format the SD card at any reason, then get "no protocol found", the fast way they think is to get new program online, actually you are supposed to have one new customized SD card from the factory not directly get software online.

2016年6月13日星期一

100% working solution for Ksuite V2.22 external excepion eefface

Newest Kess V2 master Ksuite V2.22 (Item No. SE87-D) gets error "EXTERNAL EXCEPION EEFFACE"? www.eobdtool.co.uk engineer and some users have fixed it up and would like to share the 100% working solution, in order to help all users who are confused by this question.

100% working Solution (Tested):

Download this file "Driver_USBDEVICEDRV.zip" and install it:

https://mega.nz/#!FEBHRRjS!KApCf3gl3RSOoSxPvy7ZcDpcciAFtSSxtMFw0chuZUU

Note: This file is safe to download, the engineer open an account and share here.

Usually the problem will be fixed.

If you are not so lucky to fix it ( a little part of users), download one more fixup software named "kess v2 fixusb (se87-d) " and install.

https://mega.nz/#!oVRG1YLZ!hABNRfbSXgd-EexPCKX6nWPv1_cNgarQINU9i3n_Q5s

Note: This file is safe to download, the engineer open an account and share here.

BTW, the hardware I used is: Kess V2 master Firmware V4.036 Ksuite from here:

http://www.eobdtool.co.uk/wholesale/kess-v2-manager-tuning-kit-master.html

I post this link, not because this tool quality is problem, but this error "EXTERNAL EXCEPION EEFFACE" is common, and hope it especially helpful for the site users.

2016年6月10日星期五

What specific truck models KESS V2 Master Firmware V4.036 can read write ECU for?

KESS V2 Master Firmware V4.036 newly released and gathers a number of fans in a short time, since it is the upgrade version of KESS V2 Master Firmware V4.024. Then most users tend to ask what specific KESS V2 Master truck models Firmware V4.036 can read write ECU for, compared with KESS V2 Master Firmware V4.024, what more models it adds? Does it keep the same good quality as KESS V2 Master Firmware V4.036? To seek the answers to these questions, please go on reading following parts.

Part 1: what specific KESS V2 Master truck Firmware V4.036 can read write ECU for?

As known, KESS V2 Master Firmware V4.036 can read write ECU types for a great number vehicle models including cars, bikes, motorcycles and trucks. Therefore the supported ECU types will be too long to directly attach here, even I put here, it is vague, so just click this link to download to check at your desktop.

http://www.eobdtool.co.uk/upload/pro/kess-v2-compare-with-firmware-v4.036-v4.024.rar

Part 2: Comparison table on KESS V2 Master Firmware V3.099, V4.024 and V4.036

The left one is V3.099, the middle one is V4.024, the right one is our V4.036