kess v2 Error solved (se87-d)

(se87-d)

1.Error: EXTERNAL EXCEPION EEFFACE

Solution:

Download file "Driver_USBDEVICEDRV.zip" I uploaded at mega.nz and then setup, usually the problem will be fixed

https://mega.nz/#!FEBHRRjS!KApCf3gl3RSOoSxPvy7ZcDpcciAFtSSxtMFw0chuZUU

Note: This file is safe to download.

A little percent of users may have no luck, then download one more fixup software "kess v2 fixusb (se87-d) " and then setup.

https://mega.nz/#!oVRG1YLZ!hABNRfbSXgd-EexPCKX6nWPv1_cNgarQINU9i3n_Q5s

Setup Tips (Important):

If Kess v2 fw4.036 v2.22 is not working, you are strongly advised to install our supplied working Setup 1.93 selfinstall.rar”, if you keep on installing the higher version of software, just copy the program you installed on C:/ and save, then install “Setup 1.93 selfinstall.rar” , finally replace the same file in Local disk C: with the newly saved data; then it will work

2.Get error “no protocol found" after format the SD card

Usually, some users may format the SD card at any reason, then get "no protocol found", the fast way they think is to get new program online, actually you are supposed to have one new customized SD card from the factory not directly get software online.

Best match KTAG + KESS V2 + ECM TITANIUM 1.61 for ECU tuning

Here is a super combination kit available: KTAG V2.13+KESS V2 V2.22+ECM TITANIUM V1.61. This ECU tool combination will make your ECU programming perfectly every time. If you buy them separately, KTAG V2.13 €119 + KESS V2 V2.22 €69.99 + ECM TITANIUM V1.61 €19.99 = €208.98. But now you are offered a much lower bundle price charge only €180.99. €27.99 saved!

This combination kit of KTAG V2.13+KESS V2+ECM TITANIUM 1.61 is a super and best match, why?

First, we need to make clear several ways for ECU programming and tuning. Then we can see whether this combination kit is helpful.

1) Program ECU via OBD2 communication port (the easiest and the fastest way)

2) Program ECU via BDM port which is on the ECU's motherboard (the most stable way)

3) Program ECU in boot mode, on the table

4) Solder the EEPROM out of ECU and reprogram it

KESS V2 is perfect for OBD use, while K-TAG is perfect for BDM, K-TAG also can does boot mode (Tricore and ST10).

Second, back to these ECU tools, following info will make their advantages clear.

Both KESS V2 and KTAG V2.13 are no tokens limitation. When tokens are used up, we can add tokens following the guide video in CD (No need to program tokens with j-link programmer or to remove /desolder chips)

Third, ECM TITANIUM 1.61 has the following advantages:

Crack version, do not need activation

No key needed

With 18475 driver

Work well on Windows XP and Windows 7

Checksum work 100% fine

Multi-language available: Italian/ English/ Portuguese/ German/ French/ Spanish

Last point: let’s see what other people think about KESS, KTAG and ECM Titanium at

http://www.eobdtool.co.uk/wholesale/v213-ktag-and-kess-new-programming-tool.html

1. Without any doubt the KESS V2 is the best tuning tool available today. It’s fast, reliable, has boot mode for EDC17 with tuning protection, excellent customer service and tech support. And most importantly the coverage is fantastic. Get KESS v2 and I promise you won’t be disappointed, so many nice features that most tools just don’t have.
2. KESS is for OBD, it’s very good tool. KTAG is for BDM/JTAG/BOOT. Alientech devices are good. Personally I would choose KESS and KTAG both.
3. KESS have the option for recovery, but in my view I will do my job with both KESS and KTAG.
4. I have both these tools and I prefer KESS because I can use it tuning truck well.
5. I own a KTAG and it works perfectly for new BMW F series.
6. I use KESS V2 to program ECU directly; it can be connected with OBD port. But sometimes I have to take apart the ECU to read and write, so I work with KTAG as well.
7. I recently bought this software ECM TITANIUM V1.61 very cheap but good for me. Anyway the file is very small very easy to install and will not cost you anything to try it.
8. ECM Titanium can make right checksum, but you need push checksum menu and correct when all job is done. (ECU is MEG1.1 on 700cc Roadster. 0261205006)

kess v2 master truck version v4.036 car list

A technician review on New Genius obd ii/boot master

New Genius obd ii/boot master review:

Two months ago I ordered a New Genius 5.05 K-Touch Map online. Now I want to share my experience of Chinese New Genius with you all, so post my real feedback here.

 claims this New Genius K-Touch is the first Touch Map device which can read and program the ECU in modern vehicles over OBD2. Yep, as it advertised. In garage I tested it ok to read/write ECU on these vehicles:

2014 Ford Fiesta Ecoboost 1.0 125hp auto

2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT

2014 Chevrolet Orlando 1.8 Petrol Auto

2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto

Opel Zafira , Combo , Meriva Denso

Mercedes EDC16C2 ID

How I use New Genius to remap and tuning ECU?

I read data through OBD and save file to device. Then connect with this k- touch program and export file to pc. Before tuning I use gen file extract (the original genius file). After tuning I import file to device with k-touch program and write the file to car.

P.S need DS manager device to do this.

It also claims New genius obd ii/boot master is updated version of Kess V2 and support more new vehicles. In my view, New Genius K-Touch =Laptop +Kess V2. More support vehicles I didn’t test all, but I am sure Kess cannot do Mitsubishi while New Genius can.

About Difference between New Genius and Kess V2, I found this table on eobdtool.co.uk website. By the way, I ordered New Genius from this website and got an Fgtech Galletto V50 additionally for Free.

Check this link if you need:

http://www.eobdtool.co.uk/wholesale/new-genius.html

Product Name	New Genius	Kess V2(SE87-C)	Kess V2(SE87-D)
Language	English, Italian, German, French, Spanish, Portuguese, Hungarian	English, German, Spanish, Italian, Portuguese, French	English, German, Spanish, Italian, Portuguese, French
Software	--	V2.15	V2.15
Hardware	V5.005.003	V4.036	V4.036
Tokens	No Tokens Limitation,30 Tokens come with device by default, you can press the tokens reset button on the back of hardware to get new Tokens	No Tokens Limitation,CD comes with token programmer, you can follow our video to program tokens. No need remove chips or desolder chips	No Tokens Limitation there is renew button on the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens.
Update	via hardware	via hardware	via hardware
Support Protocols	upports CAN-BUS, KWP and J1850 protocols	Line, CAN, EDC17 and MED17 and Ford J1850	Line, CAN, EDC17 and MED17 and Ford J1850
Support Vehicle	Car, Bikes, LCV Support more new vehicle than Kess V2 New Genius ECU List	Car and Bike	Car and Bike
PC	Hand-held ECU Chip Tuning Tool, no PC need when you read and write ECU data; but you need install K-touch software to export and import ECU data	PC-based ECU Programmer, you need install the software by yourself	PC-based ECU Programmer, you need install the software by yourself
Method	Read and Write ECU via OBD2 directly	same	same

When using New Genius K-Touch I met two troubles finally solved (got technical help online form www.eobdtool.co.uk), in case you may meet them as well I summarized two using tips for you:

1. Some of you may also fail to use New Genius to do DQ250/DQ500.

Solution: simply connect a 120R resistance between CAN High and CAN Low, when you connect OBD.

2. I knew this New Genius is without token limitation, so I tried to press the tokens recovery button to recovery tokens, but the light kept flashing. I tested the button and find it not working with home version change but no token.

Solution: There are 2 switches at the bottom press the switch nearest LED on top, went back up to 30, press and hold switch, apply power, waited 10 seconds pulled power out and removed clip.

This is from EOBDTOOL website technical support: A technician review on New Genius obd ii/boot master

Kess V2 Error: EXTERNAL EXCEPION EEFFACE or “no protocol found" after format the SD card

Kess V2 (SE87-D) Error: EXTERNAL EXCEPION EEFFACE  or “no protocol found" after format the SD card

Error: EXTERNAL EXCEPION EEFFACE

Solution:

Download file "Driver_USBDEVICEDRV.zip" I uploaded at mega.nz and then setup, usually the problem will be fixed

https://mega.nz/#!FEBHRRjS!KApCf3gl3RSOoSxPvy7ZcDpcciAFtSSxtMFw0chuZUU

Note: This file is safe to download.

A little percent of users may have no luck, then download one more fixup software "kess v2 fixusb (se87-d) " and then setup.

https://mega.nz/#!oVRG1YLZ!hABNRfbSXgd-EexPCKX6nWPv1_cNgarQINU9i3n_Q5s

Setup Tips (Important):

If Kess v2 fw4.036 v2.22 is not working, you are strongly advised to install our supplied working Setup 1.93 selfinstall.rar”, if you keep on installing the higher version of software, just copy the program you installed on C:/ and save, then install “Setup 1.93 selfinstall.rar” , finally replace the same file in Local disk C: with the newly saved data; then it will work

Get error “no protocol found" after format the SD card

Usually, some users may format the SD card at any reason, then get "no protocol found", the fast way they think is to get new program online, actually you are supposed to have one new customized SD card from the factory not directly get software online.

100% working solution for Ksuite V2.22 external excepion eefface

Newest Kess V2 master Ksuite V2.22 (Item No. SE87-D) gets error "EXTERNAL EXCEPION EEFFACE"? www.eobdtool.co.uk engineer and some users have fixed it up and would like to share the 100% working solution, in order to help all users who are confused by this question.

100% working Solution (Tested):

Download this file "Driver_USBDEVICEDRV.zip" and install it:

https://mega.nz/#!FEBHRRjS!KApCf3gl3RSOoSxPvy7ZcDpcciAFtSSxtMFw0chuZUU

Note: This file is safe to download, the engineer open an account and share here.

Usually the problem will be fixed.

If you are not so lucky to fix it ( a little part of users), download one more fixup software named "kess v2 fixusb (se87-d) " and install.

https://mega.nz/#!oVRG1YLZ!hABNRfbSXgd-EexPCKX6nWPv1_cNgarQINU9i3n_Q5s

Note: This file is safe to download, the engineer open an account and share here.

BTW, the hardware I used is: Kess V2 master Firmware V4.036 Ksuite from here:

http://www.eobdtool.co.uk/wholesale/kess-v2-manager-tuning-kit-master.html

I post this link, not because this tool quality is problem, but this error "EXTERNAL EXCEPION EEFFACE" is common, and hope it especially helpful for the site users.

What specific truck models KESS V2 Master Firmware V4.036 can read write ECU for?

KESS V2 Master Firmware V4.036 newly released and gathers a number of fans in a short time, since it is the upgrade version of KESS V2 Master Firmware V4.024. Then most users tend to ask what specific KESS V2 Master truck models Firmware V4.036 can read write ECU for, compared with KESS V2 Master Firmware V4.024, what more models it adds? Does it keep the same good quality as KESS V2 Master Firmware V4.036? To seek the answers to these questions, please go on reading following parts.

Part 1: what specific KESS V2 Master truck Firmware V4.036 can read write ECU for?

As known, KESS V2 Master Firmware V4.036 can read write ECU types for a great number vehicle models including cars, bikes, motorcycles and trucks. Therefore the supported ECU types will be too long to directly attach here, even I put here, it is vague, so just click this link to download to check at your desktop.

http://www.eobdtool.co.uk/upload/pro/kess-v2-compare-with-firmware-v4.036-v4.024.rar

Part 2: Comparison table on KESS V2 Master Firmware V3.099, V4.024 and V4.036

The left one is V3.099, the middle one is V4.024, the right one is our V4.036

Thinks this table too vague? Browse here for bigger and clearer one:

http://www.eobdtool.co.uk/wholesale/truck-version-kess-v2.html

Part 3: Open the ksuite to see what specific trucks models it is working?

     

Part 4: Worry about the Quality? Check the following PC board