Free download Kess v2/Ktag software Ksuite 2.23 and Winols 2.24:
https://mega.nz/#!PoIm1DJL!G7m_TsNs8dMIiI1EmVc46uqHyFu7yFFcMKen37666qA
Here you have full ksuite, with helps and internet protected
What is Ksuite?
Ksuite is software to used with Ktag or Kess V2 to read and/or write ECUs.
With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and open it, after you can make the read/write operation.
Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.
What is Winols?
WinOLS is an application, which is written especially to modify the memory contents of ECUs. It facilitates the searching and finding of maps, which can then be named and viewed in different ways and changed.
YOU HAVE TO KNOW:
The free links above with UNKNOWN SECURITY, tested by some users only
If you don't wanna take any risk, please go to versions tested by real professionals:
Ksuite V2.23 for Kess V2 5.017:
Winols version 1.5 for ktag/kess:
No risk, use with relief
Kess and KTAG rework: Free but unknown safety
Kess v2 5.017 rework:
Ktag 7.020 rework:
NOTE that Ktag/kess rework seem to work
But no professionals haven't tried on real car or ecu for now
You have to try on your own risk!!!!!!!!!
Edit to add a note:
Tested with a lot of edc17 in these day and read and write without problem.
Tested with a edc17c50 bmw 120d f21 with gpt, read and write ok.
Tested with a edc17c50 bmw 120d f21 with gpt, read and write ok.
Kess V2 5.017 Ktag 7.020: NO need rework
KESS V2 5.017 is the latest version and perfect for OBD use
KTag 7.020 is the latest also and perfect for Jtag, BDM and all the Boot application (tricore and ST10).
(FAQ) How to use the free Ksuite v2.23 download link?
Q: Can I use the Ksuite for EU clone?
A: Yes. EU clone or China clone using the same SW.
Q: i am asking myself if i have to use an other Ksuite Setup to install the software or use the China Software I became with the tools before the rework ?
A: If you install SW which you used before reworking, you will have ksuite 2.13 software just. Install 2.23 without any doubt. Reworked tools can work with an old sw, and with a new one 2.23.
Q: This version is Internet safe too ? And works on Win10 x64 ?
A: Yes, works with win10.
Q: I can install it on C partion on SSD Disk also ?
A: Yes.
Credits to Ksuite 2.23 contributor from the CT community
没有评论:
发表评论