Here comes a solution from one customer that he solve Kess Ktag V2 no12V problem. Let us move on to view more.
Part 1: Cannot get 12v of output from Kess V2
I use a AC power to connect to my kess V2 adapter. The seller gave it. it it 12v and 1A.
When I use my kess I'm following the next steps.
1 ) Connect the adapter to kess unit
2 ) Connect the ac power adapter to the adapter
3 ) Connect the usb cable to kess unit and the computer and tun the software
My kess read ecus by OBD port. I read a seat leon 1.9 BXE perfectly. It is other edc16 ecu.
The Ksuite shows it has 12,16V-12,30V all time while it is trying to read.
I tested my power supply and it give 12 volts
Solved!
Part 2: Ktag NO 12V
Got a Ktag Clone since a few months. did about 10 ecus with it, no problem! Since today i've got no 12 volt on red wires. Normally when i click read 12v appears on red and orange wires. Now only on orange. When i connect red and orange together everything works like normal.
Here is the board with faulty component(s)
Changed this component and it worked.
Part 3: Ktag Kess V2 working good with 12V
Ktag Kess V2 with best components works well
Note that Red PCB version works better than Blue & Green versions
Ktag 7.020 maximum quality:
http://www.eobdtool.co.uk/wholesale/ktag-v7020-eu-version.html
Kess v2 5.017 of maximum quality:
http://www.eobdtool.co.uk/wholesale/kess-v5017-eu-version.html
original post:http://blog.eobdtool.co.uk/solved-ktag-kess-v2-no-12v/
没有评论:
发表评论